TidbiT v2 Submersible Temperature Datalogger

With more memory than the original StowAway TidbiT logger, the rugged TidbiT v2 Temp Logger is waterproof to 300 m (1000 ft) and is equipped with an optic interface for data offload in the field.

The tiny TidbiT v2 Temp Logger has 12-bit resolution and a precision sensor for ±0.2°C accuracy over a wide temperature range. This new v2 version has more memory than the original StowAway TidbiT logger and communicates through a convenient Optic USB Base Station or HOBO Waterproof Shuttle. The rugged TidbiT v2 Temp Logger is waterproof to 300 m (1000 ft) and is equipped with an optic interface for data offload in the field, even when the logger is wet.

Note: The v2 (orange) TidbiT replaces the v1 Tidbit which was yellow. The v1 Tidbit is still available as a special order. The Optic Shuttle DTA128B is no longer available.

Specifications

  • Measurement Range*: -20° to 30°C in water; -20° to 70°C in air
  • Waterproof: to 300 m (1000 ft)
  • Accuracy: ±0.2°C over 0 to 50°C
  • Resolution: 0.02°C at 25°C
  • Time accuracy: ±1 minute per month
  • Memory: Approximately 42,000 12-bit measurements
  • Response Time (to 90%): 5 minutes in water, 12 minutes in air moving 2 m/sec
  • Data offload: Readout full logger in less than 30 seconds while logging or when stopped
  • Battery Life: 5 years (typical); temperature extremes reduce battery life
  • Battery: not replaceable
  • Drop proof to 1.5 m with protective boot
  • Size/weight: 3.0 x 4.1 x 1.7 cm with 6.4 mm hole in mounting bail; 23 g
  • NIST-traceable certification is available through Onset at additional cost.

 

NOTE: Using TidbiT v2 Temp loggers in wet environments (>90% RH) over 30°C for extended periods of more than 8 weeks cumulative may lead to premature failure. For applications over 30°C, use the HOBO Water Temp Pro v2 data logger. For Onset's lowest cost underwater temperature monitoring solutions, see the HOBO Pendant Temp data logger. For depths greater than 300 m see the HOBO Stainless Temp data logger.


Software Required

HOBOware software and an Optic USB Base Station with Coupler are required for operation of the TidbiT v2. The HOBO Waterproof Shuttle can also be used as a base station.

* Not for prolonged exposure to chlorinated water.

** The HOBO Waterproof Shuttle can also be used as a base station.

 

About the manufacturer

Based on Cape Cod, Massachusetts, Onset has been designing and manufacturing its data loggers and monitoring solutions on site since the company's founding in 1981. Specialising in miniature, battery powered solutions, Onset data loggers are exceptional quality and value, ranging from indoor to outdoor and underwater applications. HOBO® data logger and weather station products are used around the world in a broad range of monitoring applications, from verifying the performance of green buildings and renewable energy systems to agricultural and coastal research.

Request information about this product


What would you like to know?
Prices/Costs   How to Buy   Any other questions/comments:
Your Name:


Your Email Address: Required

(Note. This is only be used for a reply)
Your Phone Number: Required
Your Location/City: Required
Your Country: Required

We will get back to you as soon as possible.

tidbit v2 brochure


File Size 229KB   Filename onset_tidbit_v2_temp_data_logger.pdf   Download

Related Pages



Base-U-4 and couplers

HOBO Optic Base Station


Home > Products > Onset - HOBO Dataloggers > HOBO Software, Base Stations & Shuttles  

HOBO Waterproof Shuttle Data Transporter U-DTW


Home > Products > Onset - HOBO Dataloggers > HOBO Software, Base Stations & Shuttles  

Temperature and Heat Flux


Home > Products